KWS Flush Handle For Glass Sliding Doors - 65 X 65mm

KWS K5260 Square Flush Pull Handle - 65mm x 65mm for Sliding glass doors to suit 8-10mm thick glass.

• Drilling of the door is required
• Recessed grip
• To be pasted on the door

Material:

• Stainless steel

Mounting

Bore diameter of glass door = Ø 50mm

Clean the door (e.g. With special UV cleaner, acetone or isopropanol).

Install female part: Remove foild from the adhesive strips, align the flush part angularly (with an angle gauge or auxiliary lines) and stick it on with the bore hole in the centre. 

Install spindle part: Remove foild from the adhesive strips, align the flush part by the guide pins and stick it on.

Press on both flush parts firmly, especially on the adhesive strips.

Once attached, the flush parts should not be removed.

The adhesive strips have to be left alone to cure for 24 hours.