KWS Post C/W Door Holder - Floor Mounted

KWS Post and door holder

• K1920 - Supplied with KWS Door Holder K1011.
• K1921 - Supplied with KWS Door Holder K1095.

Roller hook plate to be screwed to the door.

Door closer can be used.

Post Height

Standard height supplied: H = 1000mm.

(Recommended maximum height 1100mm).

Height of door holder - To be confirmed at the time of order.

Must be at least 50mm shorter than dimension H, recommended height minimum of 55mm and maximum 300mm.

Mode of operation

Foot / Hand actuation

Material

• Stainless Steel.
• Buffer: Rubber, spring-loaded - Black.

Application

• Door weight up to 100kg.

Function

To hold the door in place, push it against the holder until the hook is engaged on the roller block. Actuating the hook while simultaneously pressing the door against the holder disengages the holding mode.

The lever, switched from position A to B, deactivates the holding mode: In this case, the door holder only has the function of a spring-loaded door buffer.

Mounting

Mount the post on the floor with three screws at the desired arresting point, which should be the furthest possible distance from the door hinge.

Fix the roller block to the door at the corresponding position.

For K1921... The door holder K1095 can be adjusted perpetually up to 10 degrees to the right and left.