KWS Cast Iron Locking Handle with clamp strike plate

KWS Locking handles for two sided operation.

• These are handed (Left hand or Right hand) - Technical picture shows locking handle for Left hand.

Made of malleable cast iron with centre spindle of steel with clamp, pressure spring & felt gasket.

Other door thicknesses available on request special order only.

• K6001 - To suit 25-30mm thick doors.
• K6002 - To suit 30-35mm thick doors.
• K6003 - To suit 35-40mm thick doors.
• K6004 - To suit 40-45mm thick doors.
• K6005 - To suit 45-50mm thick doors.
• K6006 - To suit 50-55mm thick doors.
• K6007 - To suit 55-60mm thick doors.
• K6008 - To suit 60-65mm thick doors.
• K6009 - To suit 65-70mm thick doors.

Mounting

Bore a hole into the door for the spindle according to the tecnical drawing, screw on the fixing rossettes with the shimmed felt gasket in such a way that two screw holes each align with the centre hole horizontally or vertically, put the female part with laid-on pressure spring with a lock nut.

Fix the clamp in the relevant position in the door frame.

The actuation path of the lever is at 45 degrees.

The lock should be installed in such a way that the lever faces diagonally upwards at 45 degrees in the open position.